Produse pentru sunteţi special (410)

Ulker Okay

Allure

Move Trio

Ulker Teremyag

Zakia

Clip

Taris

Hannimeler

Ingenuity

Bizim Vatan, one of Turkey's most established brands, has played an important role in passing on Turkish taste since its inception. For almost 70 years, Turks have proudly presented Bizim Vatan products on their tables, as the quality and taste of the diverse range has not changed over the decades. The delicious products include tuna, garnishes, sauces, preserves, pickles, vinegars and salads - an indispensable part of Turkish cuisine.

Our Kitchen

Graphitex TK 30 - Universal forging lubricant with an excellent price-performance ratio

Graphitex CR 3401 - Graphite-containing special release agent for non-ferrous metals

Water-based special release agents in various concentrations for low volume spray application Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • castings are particularly suitable for the "bonding and welding" joining processes • products can be further diluted • effective reduction of "metallization" (metal-to-metal bonding) • exceptional release effect with good lubrication of ejectors and slides

PTFE Fiber with PTFE Blocking Agent and Silicone Free Run-In Lubricant Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 15 bar, Velocity [v max]: 10 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Chemical industry General industry Variant S6SI with Food certification EG 1935:2004 in accordance with EU 10/2011 FDA conformity Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special...

General purpose release agent, suitable for a wide range of castings including large and heavy as well as structural parts Temperature Range 160 °C to 400 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • strong release power • no build-up • bright castings • castings can be welded, painted and powder coated

Graphitex 208 RS - Graphite-containing forging oil as a substitute for forging pastes

Beads Dispenser 3D - Dosing unit for all types of shot beads / piston granules

Release agent based on 25 years of product development Temperature Range 150 °C bis 380 °C Alloy Al, Mg, Zn Properties and Advantages • high process reliability due to extremely stable micro-emulsion • excellent release effect, bright castings • parts perform unproblematically in joining processes

Carbonfiber with special impregnation and siliconfree dynamic high performance lubricant Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Characteristics Strong against abrasive mediums, yet low friction on shaft surface. Recommended shaft/sleeve hardness HRC 45 Volume stabile, minimal shrinkage, good heat conductivity Suitable as bullrings Operating range Pressure [p max]: 30 bar, Velocity [v max]: 25 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Main application Boilerfeed pumps Refiner Suitable for Chemical industry Pulp and paper industry Power plant technology Boiler houses Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1...

ePTFE-Graphite Fiber with special Para-Aramid corners Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Form stable, wear resistant, heat conductive packing, can be used as bullring Highest pressure resistance, practically no gap extrusion For high pressure plunger pumps up to 1,500 bar as die formed rings Highest pressure resistance Safe and universal packing for abrasive media Precompressed rings are recommended for applications in plunger pumps Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 1500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Plunger pumps Gate valves Suitable for High pressure plunger pumps and similar applications Bull rings Form of delivery This packing can be...

Light-colored piston lubricant with special additives for better adhesion and lubricating properties Type viscous oil Appearence light-coloured Properties and Advantages • increased service life of piston and shot sleeve • economical in use • reduced smoke and gas development

Isolat Enviro FF 12 - emulsion for HPDC - Release agent for undiluted spraying, minimum spraying

Compact and wear resistant tool made of aluminium. Advantages Packing cut without necessary length calculation (an adder-factor x - is already included) Time saving Repeatable results No waste Suitable as well for Trapez-Pack Technical data For shaft diameter up to 80 mm with W5PS-SK and 110 mm with W5PS-BU With extension W5PS-V-SK to 200 mm and W5PS-V-BU to 250 mm shaft diameter Scale: in inches and mm Packing sizes: from 3 to 25 mm Spare parts available Variants 45° skive cut type W5PS-SK 75° Butt cut type W5PS-BU Accessories Extension W5PS-V-SK Extension W5PS-V-BU Spare knife

Properties and Advantages • improved metal flow, superior die filling, lower die pressures • spontaneous formation of a thin, uniform lubricating film; in that way a perfectly sprayed film without blank spots is achieved • protection of die steel from erosion • no build-up inside the die cavity • improved die life • shorter spraying cycle • no blocking of spray nozzles and maintenance/problem-free production, even under most severe forging conditions • cost-efficient

Isolat Coate Hydro - high temperature coating - Channel and spoon coating, water-based and dilutable

Dry, dust-free, spherical, free-flowing shot sleeve lubricant Type Wax with a micro-milled graphite content of 10 % Appearence black, round Sizes 0,5 - 1,0 mm Properties and Advantages • same properties as Isolat® 80 G, but with reduced graphite content

Highly recommended for large and thin-walled Mg castings Temperature Range 160 °C to 400 °C Alloy Al, Mg Properties and Advantages • extreme release power • no build-up • bright castings

Graphitex 108 RS - Low-viscosity, graphite-containing lubricating oil for hot forming

Release agent concentrate for structural parts and natural ductile alloys - Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures